1-Part 8mm End Profile | White | Plastic Cladding Trim | 2700mm

1-Part 8mm End Profile White – The Essential Starter Trim for PVC Cladding

The 1-Part 8mm End Profile in white is an indispensable finishing component for any 8mm PVC wall cladding installation. Also known as a starter trim, J-trim, or end cap, this profile is used to begin and end a run of cladding panels – concealing raw cut edges at the start, finish, and perimeter of the cladded wall area and replacing them with a clean, neat white trim that gives the installation a properly finished, professional appearance.

Measuring 2700mm in length and sized to suit 8mm cladding panels, the white end profile is the natural companion to Classic Matt White, Gloss White, and other light-toned Classic range cladding panels. It is made from rigid PVC, 100% waterproof, and designed for use in the same bathroom, wet room, and kitchen environments as the cladding panels themselves.

How to Use an End Profile in Cladding Installations

The end profile is typically fixed to the wall at the start of a panel run – either vertically at the side of a wall, or horizontally at the top or bottom of the cladded area – before the cladding panels themselves are fitted. The first cladding panel slides into the profile’s channel, holding it in position and concealing the cut edge within the trim. A second end profile is then used at the opposite end of the run to close it off neatly. The result is a fully enclosed, professionally finished cladding installation with no exposed raw edges visible at any point.

Seal within the trim channel using LMA White Silicone Sealant for a waterproof finish at all start and end points of the cladding run.

Specifications

Length: 2700mm | Suits: 8mm cladding panels | Colour: White | Material: PVC | Application: Start and End of cladding runs | Waterproof: Yes